--- a bit of a better fit here than in the spice section ---

I tend to add synthetic detail to lores meshes and to "clean up " meshes and maps
so ......

This will be a collection of the ORIGINAL "Shape Models" used in the spice section ,IF a REAL shape file is available .
Mostly original -- most of the tab files are at 5 degrees ( 73x37 points) i use 90x46 , it is easier to import into blender .
Reoriented to :

all of them are in wavefront *.obj format ,and UV mapped to spherical projection ( some WILL need to be cubemapped!!)
" small bodies"

67P_Churyumov_Gerasimenko - 1.7 MiB
https://drive.google.com/file/d/0B6ZYAd ... sp=sharing


Steins -- 8.7 MiB
https://drive.google.com/file/d/0B6ZYAd ... sp=sharing


Lutetia -- 38.6 MiB
https://drive.google.com/file/d/0B6ZYAd ... sp=sharing



Halley -- 675.1 KiB
https://drive.google.com/file/d/0B6ZYAd ... sp=sharing



Mars :

m2Deimos.tar.gz -- 2.8 MiB

https://drive.google.com/file/d/0B6ZYAd ... sp=sharing


Jupiter :

j5amalthea.tar.gz -- 281.3 KiB

https://drive.google.com/file/d/0B6ZYAd ... sp=sharing



Saturn :

s7hyperion.tar.gz -- 474.4 KiB

https://drive.google.com/file/d/0B6ZYAd ... sp=sharing

s10janus.tar.gz -- 642.1 KiB

https://drive.google.com/file/d/0B6ZYAd ... sp=sharing

s11epimetheus.tar.gz -- 417.3 KiB

https://drive.google.com/file/d/0B6ZYAd ... sp=sharing

s16prometheus.tar.gz -- 284.8 KiB

https://drive.google.com/file/d/0B6ZYAd ... sp=sharing

s17pandora.tar.gz -- 357.0 KiB

https://drive.google.com/file/d/0B6ZYAd ... sp=sharing

Neptune :

n7larissa.tar.gz -- 189 KiB

https://drive.google.com/file/d/0B6ZYAd ... sp=sharing

n8proteus.tar.gz -- 190.9 KiB

https://drive.google.com/file/d/0B6ZYAd ... sp=sharing

_________________
"I don't pitch Linux to my friends, I let Microsoft do that for me."
Using OpenSUSE Leap 15 & CentOS 7.6

EAR_A_5_DDR_RADARSHAPE_MODELS_V2_0
http://sbn.psi.edu/pds/asteroid/EAR_A_5 ... S_V2_0.zip

--- Google drive archive of the below files
https://drive.google.com/file/d/0B6ZYAd ... sp=sharing


is the next to be worked on

## all of them are in wavefront *.obj format ,and UV mapped to spherical projection ( some WILL need to be cubemapped!!) ##


-- 216kleopatra --
### this one REALLY needs to be done as a Cube Map ###


--1620geographos --


-- 1998ky26 --


-- 2063bacchus --



-- 4179toutatis --
### this one REALLY needs to be done as a Cube Map ###



-- 4769castalia --



-- 6489golevka --


25143itokawa
## not posting this one ###
there is a hires 113.1 meg mesh in a different archive
HAY_A_AMICA_5_ITOKAWASHAPE_V1_0


-- 52760 --

_________________
"I don't pitch Linux to my friends, I let Microsoft do that for me."
Using OpenSUSE Leap 15 & CentOS 7.6

Thanks!

_________________
Never at rest.
Massimo

From : "EAR_A_5_DDR_SHAPE_MODELS_V2_1"

i will not be posting ALL of these
Vesta has a newer file and so dose Deimos and Phobos

243 Ida mesh from :243ida.tab


243ida.tar.gz 1.4 meg ( contains a 2k map )
https://drive.google.com/file/d/0B6ZYAd ... sp=sharing

253mathilde mesh from : 253mathilde.tab

this one i had to inpaint FIRST before importing it into blender
-- one look at the DEM will tell you why

the Original dem strait from the tab file

after "inpainting " it


the mesh in Blender

also included a 1k texture that came with the tab file blended with the DEM

253mathilde.tar.gz - 839 Kb
https://drive.google.com/file/d/0B6ZYAd ... sp=sharing


951gaspra mesh from : 951gaspra.tab



the 1k texture included is from the 3600x1800 map in "MULTI_SA_MULTI_6_STOOKEMAPS_V2_0.zip"
then blended on top of the DEM

951gaspra.tar.gz -- 835.4 Kb
https://drive.google.com/file/d/0B6ZYAd ... sp=sharing

_________________
"I don't pitch Linux to my friends, I let Microsoft do that for me."
Using OpenSUSE Leap 15 & CentOS 7.6

Thanks again. (ambient light up to show). BTW: are these meshes already optimized in seat of SSD?

_________________
Never at rest.
Massimo

they are only mostly unedited imports
most of the *.tab files are in 5 degrees or 3 degrees
this makes a DEM of size 73 x 37 px. ( 0.2 ppg ) or 121x61 ( 0.33 ppd)

i bump that to 90 x 46( 0.25 ppd)[ or 180x91 for the 3 deg.] to make it easier to import the simple cylindrical; image into Blender

then remesh them to remove the "polar pinch"
and UV map -180 to +180

the .obj files are not optimized in any way
they are just the" mostly" original unedited data

_________________
"I don't pitch Linux to my friends, I let Microsoft do that for me."
Using OpenSUSE Leap 15 & CentOS 7.6

Near Earth Asteroid Bennu / 101955bennu / 1999 RQ36



270.7 Kb zip file on my G-drive
https://drive.google.com/file/d/0B6ZYAd ... sp=sharing
the orig tab file and a obj mesh ( rotated to blenders northpole UP )
and a 1ppd dem in Meters

_________________
"I don't pitch Linux to my friends, I let Microsoft do that for me."
Using OpenSUSE Leap 15 & CentOS 7.6

These are great John. Do you have any more?